After the technology has given such a boost in the field of music, if the CD player stops working suddenly, it makes us worried and also people are prepared to shell out large sums of money to repair it though the problem may be simple. A journey with no music would be out of the question these days. Hence repairing a music system can be done by the user by following simple steps. But how is car CD troubleshooting done? There are mainly three types of inspection needed to find out the error in the player. The first step is to narrow down the trouble by following few other steps, checking the wire connection is another primary things to be done and checking for trouble in the playback of the CD.

Troubleshooting involving diagnosis and then fixing it by finding the cause for the problem. First step involves focusing on a specific problematic area . Next step would be to check if the connections are proper and the last step is to troubleshoot. Let us look at each step in detail

The first step is to determine where the problem is. Check whether it is in the radio or music player and the like. This can be done immediately by playing the radio. If the radio works it shows that there is some technical fault with the player. The speakers must also be checked if both are playing properly or if any one of the speakers is not.

Another important things is to check proper connection of power cable to the speakers. Security is also a major concern. So always ensure that if power cable is connected only to positive terminal . It is also necessary to check if the CD player does not work properly because the fuse inside the glass is blown out . So always check the fuse box of the power cable. So by checking out these things our problem gets narrowed down.

Next we have to check the wiring of all connections. From an ordinary electronics shop get an electronic meter which is easily available. This electronic meter something like radio shack helps to check if current is flowing properly through the speaker wires. Separate the speaker which is usually mounted. This is done by unscrewing. Now by use of alligator clips to the wires of the speaker we check if we get reading. If we get a reading it means current is properly flowing through the wires but the problem is with blown out fuse which can be easily replaced. Now check if we can hear sound from the speaker. On the other hand if we see any reading it means there is a problem along the wire. If that is the case let us not try to repair the damaged or broken wire. Buy a new wire and try to look for the reading.

The next thing one should do for checking for trouble shooting is checking the wiring connected to the backside of the CD player using a flashlight at the back side of the dash board. If all these wiring are safe and secure then disconnect the positive cable from the battery of the car. This will put the CD player back to the factory conditions resetting all its characteristics to the initial stage. This will solve the problem in trouble shooting but you need to tune back all your stations and reset your clock.

After all troubleshooting methods are done attach the player back to the sets. We may need to reset the clock and tuning stations. Regularly clean tour sets with chemical reagents which prevents dust accumulation.

One need not head to the service as soon as he encounters a problem in car CD troubleshooting, these simple steps would be like a initial check for your car CD player.

Learn more about Autozubehoer. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.