Posted by Henry Woody in January 31st, 2010
Today is a time when the mobile phones are inevitable. There are many studies that show that the drivers are more prone to accidents when they use a mobile phone. At a time like this, the Bluetooth came as a blessing in disguise. The usage of Bluetooth had many benefits. It uses no hands and therefore the driver can fully concentrate on the driving rather than on the phone. The Bluetooth can also help controlling the music in the player and radio. This is convenient for many reasons for the people who drive alone. This article shows how to add a Bluetooth to your car with little professional help.
This article primarily helps the customer to choose a Bluetooth. When the Bluetooth device is purchased properly, half of the problems are solved. A person new to this might get cheated with the various features and the cost.
The first thing to do to have a Bluetooth added to the car is to enquire about the different models of the devices available. The primary step is to check with the various features all the available car radios. The best suitable radio that fits in the budget and the necessity is then selected. It must also be tested if it is compatible with various other devices that are Bluetooth enabled. The information about the cost is also noted.
The different features, brands, models and functions are scanned. Based on the above four important things the most suited radio can be selected in the gadget shop or the shop that sells all things for automobile interiors.
Next thing to be kept in mind is the price. But also ensure that we don’t compromise on quality just to make it less expensive. If quality is not good it may not be compatible with audio speakers or other devices such as CD players
After the selection of the player, it must be checked for any flaws in the system. It has to be played and checked before buying it. The purchase is advised to be made with a good dealer so that the buyer gets a product that has warranty. This is to ensure safety at least economically if there is problem in the system. The bills of purchase are also kept safe.
The Bluetooth device that is selected is preferred to have many extra features. Some models have additional feature of storage of phone numbers that can be directly transferred from the mobile phone. The knowledge of changing trend with the technology is essential. This will make the buyer to go for the latest one so that it is not out dated very soon.
There are many tips that can be kept in mind in order to buy a proper gadget. This article basically deals with how to add a Bluetooth to your car and is very direct and can be adopted by everyone.
Want to find out more about Car Hifi, then visit Author Name’s site on how to choose the best Car Audio for your needs.
Tags:
Bluethooth,
cars,
cars_and_trucks,
installation,
Trucks
Related posts
Posted by Henry Woody in January 31st, 2010
People who like to listen to loud music are the ones who are likely to bridge car amplifiers. By doing this the volume of the audio is increased to a great extent and also improves the clarity of the sound. More power is also provided to the speakers. Its function is similar to that of the subwoofer. The very important fact is that the connection should be done properly the first time before testing it. It is very important to know how to bridge two car audio amps since if the connection is done in the wrong way damages can be made to speakers and also the amps itself. Due to the high power the circuits can get burnt and damage it.
The easiest way to improve and enhance the sound of speaker is to connect two car amplifiers together . This also gives lot of power for bigger speakers such as woofers. We may need few things before we start doing this job . They are wrenches, pliers, wire strippers, wire rated for the amplifiers and of course the two amplifiers which we are planning to bridge.
Utmost care must be taken before buying the amplifiers. The manuals must be thoroughly read and must be made sure that both the amplifiers that are purchased can be bridged. If they can be bridged the amplifiers can be bought. If it is not sure then it is advised not to buy those.
Then the supply of power is cut from the two amplifiers. This is done by removing the cable from the positive end of the battery of the car with the help of pliers or wrench. It can remain in such a way till the amplifiers are completely bridged.
There will be a bridge switch at the rear end of each amp usually. Turn on that switch in case if it is there. Take a wire . Remove the insulation to about half inch in both the ends of the wire taken.
The insulation is then stripped for half an inch from both the ends of the wire. The wire is then connected between the two amplifiers. In one it is connected in the positive end of an amplifier and the other end is attached to the negative of the second amplifier. This is done by wrapping wire so that it surrounds the terminals. Then the knobs are screwed back to position. Generally there is colour code for the two terminals. The colours for negative and positive are black and red respectively.
The speakers and the terminals in the bridged amplifier can be connected by the wire. The positive wire is connected to the terminal which is positive and in the same way negative is connected to the negative of the speaker.
This article would have proved to be effective in guiding us on How to Bridge Two Car Audio Amps by instructing and explaining all steps with useful suggestions and tips.
Learn more about Autozubehoer. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.
Tags:
amp,
amplifiers,
bridge,
cars_and_trucks,
powernetshop.at,
Trucks
Related posts